That’s right; you’re not restricted to line-free connections when using the Beats for gaming. It’s a versatile audio tech that can also be hardwired to various gaming devices. However, be mindful of the conditions you’ll have to meet when using the Apple headphones in this particular realm.
How Do I Use Beats Solo3 Headphones as a Gaming Headset?
If you have a Beats Solo3 Wireless lying around, you may have thought of using them as a gaming headset. Generally, this can be done by relying on the wireless or wired route. You only have to choose which method goes well with your gaming device and which one fits your preference.
There’s the hardwiring method, where you rely on the Apple headphones’ 3.5 mm cable. This route is the easiest, most direct way of connection because you only have to plug the ends to their designated ports. However, not all gaming devices can accommodate this port, especially if it is nonexistent in the first place.
This is where the wireless route comes in and provides you with another option. To elaborate, the Apple headphones are mainly advertised as a wireless device. As such, you can connect to a console without wires as long as the Bluetooth protocol is present and in use.
In cases where gaming mediums don’t have built-in Bluetooth, you’re free to use a dongle or a transmitter instead. However, you’re bound to be limited when using these as you’re bypassing the gaming device’s system. You’re either going to have no mic access or experience audio latency.
Does Beats Solo3 Have Latency?
If you were to use the Beats Solo3 the wireless way, you’re bound to experience latency. This is because Bluetooth connections, by default, have a certain lag due to digital audio processing. It will take a few milliseconds to convert digital data to an audio signal compatible with your headphones.
For reference, the Apple-owned headphones function around the 4.0 version of the protocol. This may not be the latest umbrella iteration of Bluetooth, but it jives remarkably with the Beats Solo3 features. Aside from being equipped with the W1 chip, the audio device is also AAC-compatible to boot.
However, you’re still bound to experience audio delays with all its great specs and features. This is the case whether you’re using an Android or Apple product as your source device. Don’t get bummed, though – eliminating it may be impossible, but you’re free to reduce the lag.
Here are some tips and tricks to look into if you’re aiming to lessen Bluetooth latency:
- Check Supported Audio Codecs. The Beats Solo3 supports AAC audio codec. As such, aim for devices that also host the same matching format. If your source tech is not similar, the audio will revert to SBC, which is the most basic audio codec.
- Minimize the Distance. One of the most common reasons for the audio delay is the space between devices. Note that the Beats Solo3 has a Bluetooth range of 60 meters (197 feet). Try to station your source gadget within range to avoid connection loss.
- Reduce Interference. The room you are in when trying to link your headphones to the source widget may be full of interference. These include appliances using the same frequency, like compatible Bluetooth devices. These may also include physical obstructions like walls, furniture, or other synthetic materials.
- Opt for Wired Connections. Try using a compatible cable instead if you’re tired of extreme audio latency from your Beats Solo3. Hardwiring it to a source device will definitely reduce lag since it is a direct connection. The headphones bundle comes with a cord, but you can also buy one from the Apple website.
Can I Connect Beats Solo3 to PS4?
If you’re looking for a way to link your Beats Solo3 to PS4 wirelessly, know that there’s no standard way to do so. Sony has a mindset of keeping to its devices, so you’ll have a hard time hooking it up with other brands. Their PlayStation models are no different – the company has official headsets released for exclusive use.
True, third-party producers licensed by Sony exist to create headphones compatible with the PS4. However, Apple’s very own Beats Solo3 Wireless isn’t one of those. This doesn’t mean you can’t look for a workaround, though, so don’t close your doors to possibilities.
For instance, you could try your luck by using a Bluetooth dongle. This method is not reliable, but it’ll give you a chance to possibly link your Beats Solo3 wirelessly. For reference, a Bluetooth dongle is an accessory that can process Bluetooth wireless signals.
On the other hand, there’s another way available for you if you’re not keen on noncable connections. The Beats Solo3 is mainly advertised as wireless tech, but it also has a 3.5 mm port for hardwiring.
How Do I Get My Beats Solo3 to Work on My PS4?
One sure way to get your Beats Solo3 working on your PS4 is by using a cable connection. The headphones have a 3.5 mm port giving you much broader versatility in terms of linking to other techs. It’s quite a useful addition enabling you to pair the device to Sony’s PlayStation 4.
Aside from having superb audio quality, the Beats Solo3 also has an integrated mic making it a great fit with the PS4. This can be found embedded in the headphones’ 3.5 mm RemoteTalk cable. For the record, you can buy this wire on Apple’s official website for less than $30. With it, you’re free to communicate and coordinate with your team in-game.
After you’ve linked the Beats Solo3 Wireless and your PS4 together using a compatible wire, you’ll have to perform a few steps for adjustment. Here’s the process to help you with this:
- Check whether the Beats Solo3 is appropriately linked to your PS4 / DualShock controller.
- Navigate to Settings and look for the Devices category. Under this, select Audio Devices.
- Tap on Output Devices and check if the Headset Connected to Controller option is activated.
- Go back to the Output Devices panel and choose the Output to Headphones choice. Ensure that the All Audio option is selected.
- In the case that you find the headphone volume too high or too low, you can also adjust it. This can be done by going to Audio Devices and changing the Volume Control (Headphones) menu.
On another note, there’s also the Bluetooth dongle option that may or may not work for you. This is technically a gamble, especially since Sony did not create the PS4 to connect with third-party audio devices. Here’s how you do it:
- Link the Bluetooth adapter to one of the USB ports available on your PS4. Also, don’t forget to link the 3.5 mm AUX adapter to your controller.
- An indicator will light up once your Bluetooth USB adapter is working and receiving power. Look for the pairing mode button on the dongle and give it a tap for activation.
- Once the adapter is in pairing mode, press the pairing button on your Beats Solo3 headphones.
- The LED indicator light on the adapter will stop flashing if the Bluetooth connection is successful. Once it is, go to Settings, then Devices.
- Select Audio Devices, then tap Go to Input Device. The Headset Connected to Controller option should be highlighted. If it isn’t, your AUX mic adapter is not functional.
- Go to the Output Device screen and tap USB Headphones (USB Audio Device). This will relocate the game audio to the Bluetooth dongle. In turn, your Beats Solo3 will also output the in-game sounds.
- Navigate back to Audio Devices and click on Adjust Microphone Level to alter the volume. Alternatively, you can also adjust the output on your headphones by going to Volume Control (Headphones) category.
Can You Use Beats Solo3 on PS5?
Since the Beats Solo3 is among the models with a 3.5 mm audio port, you’ll have no trouble using it on your PS5. However, you should be mindful of the kind of cable you’re going to utilize. This is because certain wires don’t have an integrated mic in them, defeating the purpose of headphones in the first place.
If you find the cable connection restrictive, the Bluetooth adapter is an alternative for you to link the Beats Solo3 with your PS5. However, this wireless route isn’t guaranteed to work considering the nature of Sony, the owner of PlayStation models. The brand is quite keen on tying the users to their ecosystem, meaning they also have their trademark headphones.
Apple’s Beats Solo3 is also not a part of Sony’s list of licensed third-party headsets. As such, the PS5 alone does not have the right software to form connections with the audio device. This is where you bet on using the Bluetooth dongle, which you set into pairing mode to link with the Beats.
How Do I Use My Beats Solo3 on PS5?
To use the Beats Solo3 on your PS5 the wired way, you’ll need a compatible cable. Apple got that covered with their Beats RemoteTalk Cable worth $30, complete with a built-in microphone. You also have to tweak a few settings in the connection to ensure the audio and mic inputs are going along the right way.
There’s an exception to this, though – users with the PS5 DualSense controller don’t need to alter anything at all. You only have to link the Beats Solo3 to the controller using a compatible cable and use it as it is. Here’s what you can do, though, if you’re not in possession of this particular model:
- Link the Beats Solo3 Wireless on the PS5 controller using a compatible cable.
- Give a tap on the PlayStation (P) logo on your controller. This will bring you to the Options menu located at the bottom of the display.
- Tap the speaker icon to navigate to the Sound menu. There will be two options presented, the Output Device and Headphones.
- Select Headphones if you’re aiming to adjust the volume. You can opt to either increase or decrease the output of the Beats Solo3, depending on preference.
- If you aim to change the audio output route, go to the Output Device option instead. Tap Controller Headset instead of the HDMI Device (TV) alternative. This will ensure that your PlayStation’s audio is routed to the Beats Solo3 Wireless.
It’s a much more complicated process if you’re adamant about Bluetooth-linking the Apple-owned headphones to your PS5. The gaming console is not meant for non-Sony headsets, but there’s a certain workaround. A disclaimer, though: this is not a foolproof method and requires an external device to work.
Specifically, you will need a Bluetooth audio transceiver for this to work. Note that not any dongle will do; you’ll have to find one which has both a Bluetooth transmitter and an AUX adapter. If you happen to find one in your stash, here’s how you set it up to work on your Beats and PS5:
- Fit the Bluetooth USB adapter in your PS5 and the 3.5 mm AUX adapter into the controller. There’s a button on the USB adapter to activate pairing mode, so press it when you’re ready to start linking.
- Turn on Bluetooth on your Beats Solo3 Wireless as well. Once you do, look at the light on the USB adapter and wait for it to stop flashing. This means that the headphones have connected successfully with the dongle.
- Go to the Settings page on your PlayStation 5. Scroll down until you see the Sound category. Select Audio Output on the list of menus.
- Tap Output Device, then click on USB Headphones (USB Audio Source).
- Navigate back to Sound and choose Microphone. Select Input Device, then choose Controller Headset.
- Return to the Sound menu, then tap Volume. Choose Headphones to adjust the output on your Beats Solo3.
Can I Use Beats Solo3 With Xbox?
If you have the Beats Solo3 in your stash, it may have occurred to you to use it with your Xbox. Luckily, you can use the Apple-owned headphones as a gaming headset, but only if you’re willing to go the underground way. This is because, by default, Microsoft’s Xbox is not made to wirelessly connect with Beats models.
You’ll have to use a trustworthy Bluetooth adapter to help you bypass the gaming console’s system. There’s just no way around it, the two technologies are just not meant for standard connection.
This also applies when you plan to link your Xbox via the cable route. This model, in particular, only sports a 2.5 mm audio port. As such, you will have to use a 2.5 mm male to 3.5 mm female audio adapter to use the Beats Solo3 on your console.
On another note, you can also use the Apple headphones as an audio-only headset on your Xbox. However, you should have an RCA to 3.5 female adapters on hand to make this work. Disclaimer that the microphone on your Beats Solo3 is nonfunctional via this route.
How Do You Connect Beats Solo3 to Xbox?
To connect the Beats Solo3 to your Xbox, you’ll have to possess the right equipment. Of course, you’ll also have to determine whether you want an audio-only connection or if you prefer it with a mic. External accessories will help significantly establish this connection, so make sure you find the right one.
For wired linkage, you should have a 2.5 mm to 3.5 mm female audio adapter. The Beats Solo3 Wireless has a 3.5 mm cable connection you can link indirectly with the Xbox. On the other hand, the Microsoft gaming console only sports a 2.5 mm port which does not fit with the Beats’ cable.
You will need the mentioned adapter to form a wired connection instead. Simply plug the 2.5 mm end on your Xbox, then attach the 3.5 mm cable to the female end of the adapter. With this, you can link the two devices together even though they require different lines.
On the other hand, you also have a Bluetooth dongle as an option. This is a wireless method of linking your Beats Solo3 to your Xbox console. However, note that you won’t be able to converse with your teammates in-game due to a lack of mic support.
All you need to do is attach the Bluetooth dongle to your Xbox controller port. Once you’re sure it is turned on, it’s time to activate Bluetooth on your Apple headphones. The automatic pairing will occur, so you won’t have to press any extra buttons.
Alternatively, you also have the option of an RCA to 3.5 mm female adapter. This route will only provide you with an audio output, though, so you can’t engage in a conversation with your teammates. Remember that this method is only for users whose TV has no respective 3.5 mm headphone jack.
The next steps will be easy once you’ve got your hands on an RCA to 3.5 mm female adapter. Simply plug the audio cables from your Xbox package into the adapter ports. During this process, keep an eye on the red and white audio lines and ensure they’re linked to adapters of the same hue.
This means you should only link the red audio cable into the red adapter port. Similarly, the ones should be connected together properly. After this, plug the Beats Solo3 Wireless’ into the adapter’s 3.5 mm port.
Will Beats Solo3 Work With Xbox One?
Your Beats Solo3 Wireless is more than capable of working with the Xbox One model. Granted, Microsoft gaming consoles have a history of not having Bluetooth support. However, if you’re eager to link the Apple headphones via the wireless route, there are certain workarounds.
There are third-party accessories to help you out, specifically in the form of Bluetooth adapters. This is a much-needed intermediary because the Beats headphones are only compatible with OMTP wiring. It’s a different standard from the Xbox One’s very own CTIA wiring.
Aside from this, you can also use a 3.5 mm RCA female adapter coupled with a 2.5 mm male to 3.5 mm female audio adapter. This will provide you the opportunity to listen to your gaming audio using your Beats Solo3 wireless. For reference, this will work only if the headphones are linked to either a TV or gaming console.
Another technique you can consider involves a more direct approach. Aside from being wireless, the Beats Solo3 is also equipped with a hardwiring alternative. To make it work with your Xbox One, you should have a compatible cable on hand, like the RemoteTalk cable from Apple.
How Do I Connect My Beats Solo3 Headphones to My Xbox One?
Although the Xbox One has no Bluetooth functions, you can still connect it to your Beats Solo3 in a variety of ways. However, it won’t be as simple as it seems, especially as you’ll need a few accessories to make the linkage work. For reference, Xbox models have their proprietary protocols to keep them from linking with other nonbrand models.
First off, you have the wireless route to think of. If you have a Bluetooth adapter or dongle lying around, simply plug it into the Xbox One controller after turning it on. Once the adapter has been set up, it’s time to activate pairing mode on your Beats Solo3.
There are things to note with this connection though, like the integrated mic restriction on your Apple headphones. Since you’re bypassing the Xbox One’s system, it’s only natural that you’ll face limitations in the form of not having any mic functions.
This can easily be solved, however, so you won’t have to stress about in-game communications. Aside from investing in a Bluetooth transmitter, try getting your hands on a Bluetooth receiver too. This will help you hear game audio and make use of voice chat while streaming with your Beats headphones.
On the other hand, the second method involves a 3.5 mm RCA female adapter and a 2.5 mm male to 3.5 mm female audio adapter. Since the Beats and the Xbox One have different wirings by default, adapters are necessary. Plug the designated cables to the RCA adapter’s port, then link the other adapter to your console’s 2.5 mm port.
Reach out for your Apple headphones’ 3.5 mm cable and tether it to the corresponding end of the 2.5 mm to 3.5 mm audio adapter. There’s no extra step after this – you’re free to stream game media on your Beats Solo3 via the Xbox One model.
The third option is more appealing if you don’t have an RCA female adapter in the stash. Instead, what you have at your disposal is a legit Apple Beats Solo3 Wireless cable. However, to make this method work, you’ll have to find yourself a suitable audio converter.
A reminder that the Apple-owned headphones and Microsoft’s gaming console have different wirings. As such, a converter is a perfect accessory for translating the headset’s OMTP codec to the CTIA instead.
Does Beats Solo3 Work With Xbox S?
Like all Xbox models, the Xbox S does not have Bluetooth support. However, it’s still capable of working with your Beats Solo3 as long as you know the indirect route. To be specific, you’ll have to get a 3.5 mm Bluetooth transmitter.
However, you should be aware of the consequence when you choose to use transmitters as a workaround. This is in the existence of an audio lag, where you’ll experience milliseconds of sound delay during gameplay. While you may not notice it on slow games, you’re sure to be bothered when playing competitive ones like Fortnite.
To avoid this from happening, there’s another route available for you. This is in the form of a 3.5 mm cable, which you can directly link to your Xbox S controller. With it, you reduce the chances of audio latency while still getting the Beats Solo3 to work wonders.
How Do I Connect My Beats Solo3 to Xbox S Series?
There are two routes available for you if want to connect the Beats Solo3 to your Xbox S. To be specific, you have the wired or wireless route at your disposal. For instance, if you’re someone who hates being restricted by a cable, your only other option is to use an adapter.
That’s right – the Xbox S has no Bluetooth capabilities. As such, you’ll have to bring out a Bluetooth adapter to initiate a connection. All you have to do is activate the adapter and link it to a compatible port in your Xbox S console.
Once it is connected to your Xbox S, press the adapter once more to activate Bluetooth pairing mode. Similarly, your Beats Solo3 should also have its Bluetooth function turned on. Once within range, both devices will automatically link to each other without further ado.
Remember that you’re only using a Bluetooth transmitter. This means that you’re not going to be able to use your Apple headphones’ mic with this connection. You’re only limited to listening to in-game media and cannot engage in real-time strategies with your team.
If you’re not a fan of this, you can directly link your Beats Solo3 Wireless to your Xbox S console. This is done by connecting the 3.5 mm compatible cable of your headphones to the gaming console’s controller. For reference, the 3.5 mm port of your Xbox S is located on the bottom portion of the device.
Can You Use Beats Solo3 With Nintendo Switch?
If you’re a huge fan of the Beats Solo3 and someone who enjoys rounds of multiplayer games on a Nintendo Switch, there’s good news for you. Using the two devices for more immersive gameplay is doable, saving you from splurging on pricey, dedicated headphones. The pairing will provide you with high-fi sound courtesy of the headset’s superior audio technology.
In fact, you generally have two options to choose from when using the Beats Solo3 with your Nintendo Switch. First off, you have the trusty wired route users have been stuck with for several years. It’s a great method, especially if you’re one to enjoy the Switch on handheld mode quite often.
Users who have long been looking for another alternative to the 3.5 mm cable can also rejoice. Note that before 2021, you can only hardwire the Beats Solo3 on your Nintendo Switch. However, Nintendo had a change of heart regarding Bluetooth audio support and added it to their version 13.0 software update.
True, the older 4.0 firmware update already allowed you to link the Beats Solo3 to Switch wirelessly. However, this upgrade is only accessible to users who have availed themselves of a Bluetooth audio adapter. On the other hand, the 2021 update enabled you to pair the Apple headphones to Switch without any external assistance.
However, be aware that linking the Beats Solo3 on your Nintendo Switch via Bluetooth has some restrictions. Look at the list of these limitations below:
- Connecting the Apple headphones with your Nintendo Switch gives you a limit of using two wireless controllers. As such, you can only play two-player games at most when using the Bluetooth route.
- The Bluetooth audio support on the Nintendo Switch only supports SBC codecs. It’s the most standard form of audio codec, susceptible to the worst audio lag and pairing problems.
- You can only connect a single Beats Solo3 Wireless on your Switch during Bluetooth mode. Also, the video game console, by default, can remember up to ten devices for linkage. If you’ve already filled in the quota, you’d have to remove one of them to accommodate the Beats.
- Your Nintendo Switch may now be compatible with Bluetooth audio pairings. However, the Beats Solo3’s microphones are another case. It’s automatically disabled when wirelessly linked to the console, so you’d have to use an extra built-in mic dongle.
- Bluetooth audio support is only functional if your local wireless communication is inactive. Your Beats Solo3 will automatically disconnect if you’ve turned on this feature. For reference, the local wireless communications perk links two Switch systems together.
- Tracking lost controllers is also impossible when using the Bluetooth upgrade on your Nintendo Switch. The controller menu will be inaccessible to you if you’re using the Beats Solo3 via Bluetooth connections.
How Do I Connect Beats Solo3 With Nintendo Switch?
Ultimately, there are three ways to connect the Beats Solo3 with your Nintendo Switch. First off, you have the easiest and most direct way of linkage through the use of a 3.5 mm cable. This is the most convenient route, especially if you prefer to enjoy your games through handheld mode.
All you need to do is buy the respective 3.5 mm cable and plug one end into the Switch’s headphone jack. The other end should be secured to your Beats Solo3’s separate port. After checking if the line is properly positioned, you’re free to play and engage using your Apple headphones.
The second one is more of a surprise from Nintendo, a part of their 13.0 firmware update in 2021. The brands finally included built-in Bluetooth audio support on Switch models to answer the demands of many. With it, you won’t need to use any external device to link your Beats Solo3 to the Switch wirelessly.
Before trying out this cableless route, you should ensure that your gaming console has the latest software version. If you already got that covered, you’re free to follow the how-to guide below:
- Look over your Nintendo Switch system and ensure that only two controllers are paired. If it is, get your hands on your Beats Solo3 Wireless headphones and turn them on. As advised, press the power button for about ten seconds to activate Bluetooth pairing mode.
- Access the System Settings from your Nintendo Switch Home menu. Go to the Bluetooth Audio section and tap Pair. By doing so, you urge the Switch system to look for compatible Bluetooth devices within range.
- Wait for a few moments and scroll down the list of recorded devices. Click the Beats Solo3 Wireless on the selection to initiate the connection.
- If you’re unable to pair the Apple headphones to your Nintendo switch, try to restart the console. After doing so, repeat the steps mentioned above. Also, check whether there is interference coming from the Beats’ end as well.
The third option will require you to use Bluetooth dongles or adapters. You may question why this way exists, especially since the Nintendo Switch already has a built-in Bluetooth function. However, the feature has its flaws and limitations, which you can surpass by using an external device instead.
There are a variety of Bluetooth adapters on the market. Listed below are the ways you can link each one of them to your Nintendo Switch to allow your Apple headphones to connect afterward:
Via a 3.5 mm Bluetooth Adapter
- Activate Bluetooth pairing mode on your Beats Solo3 Wireless.
- Reach out for your Bluetooth transmitter and hold down its multifunctional button for about three seconds. This is usually located on the upper part of your accessory, so check it out. The transmitter is on if there is a flashing white light every five seconds.
- Once it is powered on, it’s time to plug the Bluetooth transmitter into the 3.5 mm headphone jack of your Nintendo Switch. Press the accessory twice to activate Bluetooth pairing mode. Note that it should be flashing red and blue lights after doing this step.
- Your headphones and the Bluetooth accessory should automatically link with each other. After waiting for a few moments, the transmitter will show a flashing white light every ten seconds. This is to signal you that the pairing attempt has been successful.
Via USB-A Bluetooth Adapter
If you have a Bluetooth adapter that comes with a USB-A end, it’s best to pair it with a Nintendo Switch in dock mode. This is because the only USB-A port installed in your Switch console is located on the Nintendo Dock. Note that this method will restrict your headphones’ mic and game chat:
- Get your USB-A adapter after turning on Bluetooth on your Beats Solo3 Wireless. Plug it into the Nintendo Switch in dock mode and wait for automatic linkage to take place.
- If the automatic connection does not occur, press your transmitter’s Bluetooth/power button for a few seconds. Wait for the light to turn into a different color, signifying that the pairing is successful. After this, you’re free to stream Switch game audio on your Beats Solo3 Wireless.
- Also, note that there should be an indication on your screen stating that the USB audio mode is active. You can also adjust the volume level in this section, so alter it to your preference.
Via USB-C Bluetooth Adapter
If you’re looking for the USB-C port on your Nintendo Switch, it’s located right at the middle-bottom section of the handheld gadget. Although mainly used for charging and docking the device, you can also use it for a Bluetooth workaround. With it, you can link your Beats Solo3 to the Switch via the following steps:
- Get the right Bluetooth USB-C adapter that is compatible with the Nintendo Switch and your Apple Headphones. Plug it into the USB-C port of your gaming console.
- Also, if your Bluetooth USB-C adapter has a mic for its inclusion, link it to the Switch’s 3.5 mm auxiliary port. Note that using the adapter route won’t let you use your Beats Solo3’s built-in microphone.
- Activate your Bluetooth adapter by pressing the power button at the bottom of the transmitter. Wait for five seconds at the minimum, or until the light indicator starts flashing.
- Turn on Bluetooth on your Beats Solo3 Wireless. This is done by pressing the power button for a few seconds.
- Wait for a few moments to establish a linkage between your Apple headphones and Nintendo Switch. An automatic connection will occur, and you won’t have to do anything else. Check if the pairing is successful by listening to voice or audio prompts on your Beats device.
Can I Use Beats Solo3 for PC Gaming?
Your Beats Solo3 may be called a plethora of things, but inflexible ain’t one of them. The wireless on-ear headphones can not only pair with consoles but also with your PC. The device may not be a dedicated gaming earpiece; however, it still has a reliable performance in this realm.
The most foolproof way to use the Beats Solo3 on your PC is by using a compatible 3.5 mm cable. Most computers have the respective port for this, so you really don’t need to do anything extra. The headphones have a built-in mic, but you can also use a cable with a microphone for better in-game communications.
Another way you could use the Beats Solo3 Wireless is via Bluetooth. However, you must ensure that your PC has Bluetooth features ingrained in its motherboard. If it does not, you can opt to invest in a high-quality dongle instead.
How Do I Connect Beats Solo3 to PC?
Connecting your Beats Solo3 to a PC is easy as long as you have the right equipment for it. If you’re eyeing PC gaming using a wireless connection, your computer should have a built-in Bluetooth function. Once you’ve checked that your device is capable of Bluetooth, do the steps below to pair your PC with the Apple headphones:
- Turn on your Beats Solo3 headphones by pressing the power key for a few seconds. Once you’ve seen the LED lights blinking and it emits white light, your device is ready for Bluetooth pairing.
- Navigate to the Start menu of your PC. This is found on the bottom left part of your Windows tech, characterized by a four-square symbol.
- Located on the left sidebar is a gear icon. Click on it to go to the Settings tab of your PC. Note that this character is located right above the power button, so you should have no trouble seeing it.
- Go to Devices, then Bluetooth & Other Devices. Look over the right portion of your screen and toggle the Bluetooth switch on.
- Tap Add Bluetooth or Other Device option beside the (+) symbol. When asked which kind of device you’d like to link with, select the Bluetooth category. Windows will then start scanning the vicinity for techs available for connection.
- Scroll down until you see the Beats Solo3 Wireless on the list of devices. Give it a tap to kickstart the pairing process between the audio device and your Windows PC.
After the connection has been established, there will be a ‘Your Device is Ready to Go’ indication. Wait for this notification before diving deep into your PC gameplay.
There are instances where your Windows PC is unable to read the Beats Solo3 Wireless headphones. In these cases, there are several troubleshooting steps available for you to do:
Check Out Your Bluetooth Driver
If your Bluetooth driver is outdated, you’ll experience more problems when it comes to forming connections. As such, try to check your driver status and install it manually when required. If it is missing, you should opt to look and troubleshoot the problem to solve your linking issues with your Beats Solo3.
Activate Bluetooth Driver Using Device Manager
Another reason why your Beats Solo3 is not seamlessly connecting with your PC is that Bluetooth is disabled. This can easily be remedied by enabling your Bluetooth driver via your computer’s Device Manager. Here’s how you manually do it:
- On your Windows PC, right-click on the Start button. A list of menus will show in which you should select Device Manager.
- Expand the Bluetooth option or the Sound, Video, and Game Controller to locate your Beats Solo3 Wireless.
- There will be a downward arrow icon next to the Apple headphones. Right-click on your on-ear headset and select Enable Device. After doing so, you can try linking the Beats to your Windows PC once more.
Turn Off Devices That May Cause Interference
Your Beats Solo3 is hardwired to connect with the most recently paired device. If this particular tech is not your PC, then there’s one thing you should do to avoid interference. Turning off devices within the vicinity is the way to go to ensure your Apple headphones will only tether to your Windows PC.
Press the Power Button Longer
In some cases, you may have failed to hold the power key down long enough for the Beats Solo3 to turn on. To avoid this from happening, you should always opt to press the headphones’ power button for up to ten seconds. This will ensure your Beats model is activated correctly and Bluetooth pairing is triggered on the device.
Can I Use Beats Solo3 for Mobile Gaming?
There are a lot of reasons why you would want your Beats Solo3 as a part of your mobile gaming experience. Lucky for you, using the headphones with any modern smartphone is possible and within your reach.
In fact, the Apple-acquired on-ear headset has excellent Bluetooth-phone interaction. This means you have plenty of options available to establish a connection between devices.
To elaborate, the Beats Solo3 is mainly known for its remarkable wireless properties. It has built-in Bluetooth 4.0, which most techs are capable of tethering with.
The Apple headphones are even versatile enough for cable connections. It has a 3.5 mm port you can use to hook up with other mobile technology. This includes gadgets belonging to the non-Apple spectrum, like Android ones.
How Do I Connect Beats Solo3 to My Android?
After long years of keeping a tight leash on their devices, Apple has begun opening its doors to other technology. These include giving you the freedom to link the Beats Solo3 Wireless to your Android devices. If you’re eager to know how to, check the guide below:
- After successfully turning your Beats Solo3 Wireless on, go to Settings on your Android device.
- Navigate to the Device Connectivity section, then tap on Bluetooth. You’ll have to make sure you have the toggle switch activated. This will ensure that your Android device is going into Bluetooth pairing mode.
- Go to the Pair New Device category. You’ll find a list of compatible techs within range of your source gadget. Scroll down until you find your Beats headphones, then tap Pair.
- Wait for a few seconds for the connection to be established. Once done, you’re free to use your Beats Solo3 as an audio device. These include listening to in-game audio sourced from your Android mobile.
Alternatively, you can also swipe down from the center screen of your Android device to turn on Bluetooth. This will lead you to the App Drawer, where you can activate the protocol quickly. Wait for your device to scan the Apple headphones and enjoy your gaming to the next level.
If you’re not a fan of using the Bluetooth protocol due to the audio lag, then you also have the wired route at your disposal. The Beats Solo3 Wireless has a 3.5 mm port you can use to plug a compatible cable with.
How Do I Connect Beats Solo3 to My iPhone?
Aside from being equipped with AirPlay, iPhones also have Bluetooth connectivity features. Using this, you’re able to link to the Beats Solo3 the wireless way. It’s pretty easy to do so; simply follow the steps below:
- Hold the power button on your Beats Solo3 for a few seconds to turn it on. After it has activated, go to the Settings page on your iPhone.
- Proceed to the Bluetooth category, then switch the toggle on. You’ll know that Bluetooth is activated if the toggle has a green highlight.
- After turning on Bluetooth, look over the Other Devices section. Tap on the Beats Solo3 and wait for the connection to take hold. This will automatically be established if you’ve already linked with the headphones before.
For an indication that the Beats and your iPhone have successfully paired, look for the Connected label on the right side.
If you’re looking for a more convenient Bluetooth shortcut, simply swipe from the bottom of your iPhone screen. Select the Bluetooth icon to turn the protocol on and wait for your phone to read the Apple headphones.