What CAN WE help YOU with?

How to Use Sonos Roam (The Complete Guide)

If you're closely linked with the Sonos ecosystem, you'll find that the Sonos Roam is best used with the brand's controller application. With the help of the app, you're able to stream music, activate voice control, and even adjust the speakers' treble and bass.
How to Use Sonos Roam

Table of Contents

However, it doesn’t mean your Roam is not functional on days you don’t have your Sonos app on hand. You can still use it via Bluetooth, especially if you’re out of the house with no WiFi access. The only catch is that you’ll need the app to set up the device beforehand.

How Do I Check The Battery Level on My Sonos Roam?

Sonos is a powerhouse of convenience, so you’ll have no trouble checking their products’ battery life. If you have their second portable wireless Roam speaker, you only need to open the Sonos app or even just take a glimpse at the LED light.

To view Roam’s battery status within the Sonos controller app, just navigate into the System tab and find your speakers. Next to the battery icon, you’ll find a percentage of the Roam’s battery charge level.

Note that when checking your speakers’ battery in the Sonos app, you’ll need to keep up with the software updates if you’re an Android user. In addition to that, don’t forget to enable full location access for your Roam speakers. If you don’t do these, then you’ll only see your device’s name on Bluetooth mode without any battery indication.

If you don’t have any device that can access the exclusive application, you can simply check the battery light on the front of your speakers. When your Roam has a 15 % charge or less, it will flash orange. This means you’ll need to run to your nearest charging port, especially if you want another session of quality music.

How Long Is Sonos Roam’s Battery Life?

If you’re worried about the Roam running out of steam in the middle of an intense media session, then you can breathe easy. Sonos made their second portable wireless speakers a bit more durable, not only when it comes to wear and tear. When you fully charge your Roam, you’ll be able to enjoy ten straight hours of playback using WiFi or via Bluetooth.

True, there are a lot more longer-lasting brands in the market. However, if you consider how small Roam’s battery is, you’ll be more than impressed.

If ten hours is not enough for you, you can always plug it into power while streaming. That’s right – Roam is capable of playing while still being attached to power!

What Is Sonos Roam’s Battery Lifespan?

Sonos claims that the Roam speakers have about 900 full charge cycles until you experience an inconvenience with the battery. If you’re not impressed, then you should know that these cycles are almost equivalent to three years of constant use.

True, Roam is not the longest-lasting speaker even when fully charged, but with this lifespan, you’re sure that it won’t leave you for a while. If you’re attached to your wireless speakers, you can even make several approaches to extend its life even further.

The techniques include avoiding extreme weather exposure and ensuring it’s not always on zero battery. Additionally, keeping the speakers in good condition through constant maintenance is a must.

How Do I Charge My Sonos Roam?

If you’re not a newborn in the speakers’ industry, you’re quite aware that these modern sound devices can be charged in various ways. This is also applicable to the Sonos Roam, which you can charge via the wired or wireless route.

Upon purchase, you’ll see that the Sonos Roam bundle includes one USB-C cable. If you connect this cable to a power adapter and plug the other end to Roam’s charging port, charging will immediately commence. However, there is a straightforward catch.

Sonos does not include a power adapter in the Roam package. You’ll either need to purchase their exclusive $22 Roam adapter or find a compatible one on your own.

For reference, you’ll need at least a 5V/1.5A (7.5W) adapter for the speakers to power up. Opt for an adapter with an output of 5V/2A (10W) or even higher if you want faster charging.

On the other hand, if you want to live the wireless life, you can go with Roam’s wireless charger worth $55, including the adapter. You’ll only need to plug the wireless charger to power and then place your Roam on top of the charging pad. Once you hear a click, leave the speakers for a while to recharge.

There’s also the Qi charger option if you don’t like to purchase the exclusive one on Sonos’ website. Just place your Sonos Roam in a resonant charging pad and watch it power up.

How to Tell if Sonos Roam Is Charging

The Sonos controller application is the simplest way to know if your Roam is charging properly. You’ll only need to navigate to the System Page and look for your speakers in the list of connected devices. If there is a lightning sign beside the battery indicator, it is plugged to power just fine.

Another way to check if the Roam is charging is through the LED indicator on the device’s front. Once you plug the speakers, the light should appear a solid orange and only disappear after 10 seconds.

Don’t be alarmed if the battery light indicator in your Roam stays on longer than 10 seconds. This only means that you’ve depleted the speakers to the extreme degree and is no cause of concern. The solid orange light will turn on once the Roam has accumulated enough power to turn on.

How Long Will It Take To Fully Charge My Sonos Roam?

If you’re using the Sonos Roam power adapter coupled with the USB-C cable found in the bundle, it will take two hours for your speakers to fully charge. If you’re using a more powerful power adapter like those 15W models, then it will charge even faster.

When you’re using the Sonos wireless charger, your Roam will reach fifty percent in two hours. On the other hand, Qi-compatible chargers charge at a much slower pace. It will take you five to six hours of uninterrupted charging for it to reach more than half power.

Why Does My Sonos Roam Take So Long to Charge?

If your Sonos Roam is not charging at a pace you’re satisfied with; then there are several reasons to explain why. First and foremost, you should check if you’re using an incompatible power adapter by mistake. Note that Roam requires a minimum of 5V/1.5A (7.5W) to charge, so don’t use any weaker than that.

On the off chance that you’re using a pretty powerful adapter and your USB-Cable is not damaged in any way, then these may be the case:

  • Flawed Battery. Roam may be built to withstand several throws, but it doesn’t mean it has an indestructible battery. If the internal system has suffered condensation, it will also suffer. You should check with an expert if this is the case because Sonos does not offer Roam a DIY battery replacement kit.
  • Damaged Circuit Board. When you throw Roam too hard or leave it in the shower for too long, it’s bound to accumulate damage over time. Faulty circuit boards may be the culprit of your speakers charging problems. Don’t lose hope, though, because there are specialists in the field just for this.
  • Unsanitary Charging Port. If you neglect to maintain your Roam’s physical appearance, then it’s bound to get nasty and downright grimy. Your charging port may collect debris, webs, and dirt particles that block the power output. Constantly take a look at the dock so you’ll know when to schedule for a clean-up.

Why Does My Sonos Roam Not Charge?

If your Roam is downright not charging, then you may be using a completely incompatible charging accessory. True, Roam is not picky and even works with Apple and Windows’ power adapters. However, it still has its requirements to function in tip-top shape.

Chargers 5W and below won’t affect Roam no matter how tight or keen you plug them in. Make sure that the port and the cable are not loose and are the right fit with the Sonos Roam’s charging hole.

If there’s an instance the Roam won’t charge even when you use every means possible, then contact Sonos support. This may be a case of factory damage and, when proven, will result in your Roam being refunded or replaced.

How to Turn On Sonos Roam

Being a newborn in the Sonos community means you get to explore a whole different navigation system. Luckily, it’s pretty easy to get used to, especially if you’re into their wireless speakers’ line. In particular, the Sonos Roam won’t need any complicated maneuver to start up.

If you look closely, you’ll find a control panel in the back of your wireless Roam device. The power button is the switch right above the USB-C charging port. Just give it a gentle press and wait for a few seconds for the device to boot up.

In this case, your Sonos controller application will automatically detect Roam, and you’re free to play any media of your choice. However, if this is your first time with Roam, you need to set it up with WiFi.

How to Set Up Sonos Roam

It’s no lie that it’s easy to get used to Sonos’ convenient navigation system. However, the initial setup may be a big hurdle for newbies in the technological biz. This is because Sonos owns an optimized controller program that you’ll need to access if you want to maximize your whole music experience.

Worry not, though, because the application is really user-friendly, and you’ll find it easy in a few sitting. That being said, here’s how you can set up Sonos Roam, including the initial listing of the device on the app via WiFi:

  • Step 1: Turn the Sonos Roam on by pressing the power button on the back of the device. Once the light indicator goes green, then it is ready for setup.
  • Step 2: Download the Sonos controller application to the device of your choice. It’s no problem if you’re using an iOS or Android device.
  • Step 3: Launch the Sonos app upon download, and prompts about permission control will appear. These include Bluetooth setup and finding other gadgets connected to the local internet network.
  • Step 4: Click on agree to the notification pop-ups to give the Roam access to the source device and send signals to fellow devices in the same network. One notification will show, “This app will discover and connect to devices on the networks you use’. Another will say, ‘Sonos would like to find and connect to the devices on the local network’.
  • Step 5: Once you agree to these prompts, another window will appear. This will present you with the Roam device’s terms and warranty, which you should say yes to.
  • Step 6: If you’ve read the terms thoroughly and agreed to them, then you’ll be asked to set up your Sonos system. Either sign-up with an existing one or create a new account.
  • Step 7: After you’ve finished the setup process, you’ll automatically go to the ‘Allow Auto-Discovery Screen’. Give access to the device’s location and Bluetooth configuration, then click on ‘Done’.
  • Step 8: Next, you’ll navigate automatically to the Settings tab of the Sonos application. Check the top of the screen and click on ‘Add Sonos Roam’ to the program.
  • Step 9: Give the devices a few seconds to connect. A pop-up window will appear instructing you to tap your source device to Roam. This entails giving a gentle nudge to the highlighted bottom part of the speakers.
  • Step 10: Select ‘Continue’ and read the screen that will appear afterward. This further instructs you to use the back of your source device to bump the speakers. Note that there should be no obstruction during this process, including your hands.
  • Step 11: Press ‘Continue’ once again and wait for the device code to be read. After a few seconds, the app will prompt you to connect with the local WiFi network. Enter your home password and click Connect.
  • Step 12: Wait for the notification stating that the Roam is connected to the home network. Another screen will appear, which will ask permission to update your wireless speaker. Select yes to start the update.
  • Step 13: You can watch the update progress on the bottom of your source device’s page. Once finished, you’ll see a pop-up stating that the Sonos Roam is successfully linked to your gadget. Click ‘Done’ to complete the setup process.
  • Step 14: Before going back to the setting screen, a final window shows extra data about the Roam. After reading, you’ll be able to play media to the Roam from the Sonos controller app.

Seems extra and extensive? Well, you won’t need to worry about doing this setup process again unless you’ve changed your home WiFi.

How to Turn Off Sonos Roam

Turning off the Sonos Roam is as easy as turning it on. You’ll only need to locate the power button located above the USB-C charging port and press it for about five seconds.

Once you hear a chime emitted by the speakers, it signifies that the Roam has entirely powered down. There will be no blinking on the status LED on the device’s front.

Does The Sonos Roam Automatically Turn Off?

The Sonos Roam is a top-of-the-line wireless speaker that boasts a lot of smart functions. However, don’t expect it to be able to turn itself off – Sonos has yet to add that function to any of its sound devices.

After a few minutes of not playing music, it can enter an automatic sleep mode. This will put your Sonos Roam on standby to preserve battery life, enough for it to last ten days.

This auto-sleep mode feature enables the Roam to be on power-saving mode while still ready to blast music with just one tap. Alternatively, you can also trigger this function manually if you’re not prepared for a sound experience yet.

How to Put Sonos Roam on Sleep Mode

Sonos designed the Roam speakers to be a sound device you can play in full-tune most parts of the day. When they introduced sleep mode into their feature, they seamlessly gave you the option to connect from anywhere in the house.

Here’s how you put the Sonos Roam in sleep mode manually to save battery:

  • Look for the power button on the back of the device, right above the USB-C port.
  • Press this key once, and you’ll hear a short chime. Once you do, the LEDs will also turn off.
  • To connect, you simply need to navigate through the Sonos app or press the power button once more.

Why Does Sonos Roam Keep Turning On?

First and foremost, the Roam is a smart device that functions best when controlled via the Sonos application. As such, you’ll find that it constantly turns on even when put on standby mode every time the program is accessed in your source device.

The reason for this can be defined in one word – convenience. Sonos designed the Roam to wake up whenever the controller app is foregrounded. Their sole motive is to avoid delay between opening the app and targeting media playback in the Roam speakers.

If you don’t want this feature, you can completely turn the wireless device off. This will ensure that it won’t open even when you access the Sonos app to initiate playback in other speakers.

How Do I Use Voice Control on Sonos Roam?

As one of the top runners in the audio industry, it’s a no-brainer that the Roam is more than capable of voice controls. However, it’s not accessible upon purchase, so you’ll need to gear the wireless speakers to activate this particular feature.

Here’s how you do it in a few easy steps whether you’re an iOS or Android user:

  • Launch the Sonos controller application in your source device.
  • Navigate to the Setting page, and then look for the Services & Voice option.
  • Under the Voice category, select ‘Add a Service’ and choose which assistant you like to activate.

Roam can access Amazon’s Alexa and Google Assistant, so you’ll have plenty of options to choose from. However, the Voice section can’t be seen if you’re in a region with no active voice services available.

Lastly, if you have enabled the voice control features, you’ll access the smart assistant. You can do this by speaking through the Roam’s microphones or talking within its range.

What Is the Microphone on Sonos Roam?

There are three microphones in the Sonos Roam, each of them integrated deeply to give the best digital assistant encounter. These microphones are capable of beamforming and echo cancellation. However, they shine the most in Roam’s exclusive TruePlay tuning – capable of adjusting the audio output depending on where you are located.

These smart microphones can be controlled via the toggle in the Roam’s control panel. You can’t miss it, especially as your wireless device only has four buttons to press.

Since you can turn the Roam’s microphone on and off, you don’t have to worry about the device always listening. You get to keep your privacy by muting the built-in microphones in your Roam speakers.

How Does Alexa Work on Sonos Roam?

Alexa is Amazon’s very own smart assistant capable of more than enough intelligent features to leave you impressed for days. If you connect Alexa with Sonos Roam, you’ll get the whole experience of the AI’s inner workings.

Just say the magic words of ‘Hey Alexa’ or even ‘Hey Sonos’ to initiate a round of music playing, news reports, trigger phone calls, and the likes. Alexa works with Roam the same way it does on Amazon’s very own Echo speakers. As long as your portable sound device is connected to WiFi, the possibilities are endless!

How Do I Connect Alexa to Sonos Roam?

Before worrying about linking Alexa to your Sonos Roam, there are a few things you should prepare for. First, the voice control feature should be activated on your device, including setting it up in your Sonos controller. Note that you should also have the latest updated software and drivers on your device to avoid any inconvenience.

Second, you should also download the Amazon Alexa application on your source device. It’s best to sign in and set up your account in preparation for connecting it with Roam.

If you’ve already gotten these tasks out of the way, then here’s a quick guide to connect Alexa to your Roam speakers:

  • Launch the Sonos controller application in your iOS or Android source device.
  • Locate the Settings tab in the bottom corner of the app. Then, go to ‘Services and Voice’.
  • Under the Voice section, select Add a Voice Assistant. Choose ‘Amazon Alexa’ and tap Add to Sonos.
  • After adding Alexa, you’ll need to choose which rooms you prefer to designate the AI with. You can select a few rooms or add Alexa to all of them. Press ‘Add Amazon Alexa’ located on the bottom screen to lock it in.
  • Once you’re satisfied with the room designation, tap ‘Sign in to Amazon’ to navigate to the login page. Or you can go to the Amazon Alexa application instead.
  • Click the Home tab and then the ‘Browse Skills’ button.
  • Search for Sonos in the Skills search icon located on the top-right screen.
  • Select the Sonos skill, then ‘Enable to Use’.
  • Once done, you’ll be prompted to link your Sonos and Amazon accounts together. On the Sonos’ homepage, sign in to your personal Sonos account.
  • Select ‘Okay’ when permitting Alexa to access your Sonos system. Then click on ‘Continue’.
  • Tap on ‘Discover Devices’ on the next screen. Your home network will be searched for compatible Sonos speakers.
  • Alexa will now be accessible into your Sonos speakers, including all its smart functions.

In addition, during the setup process, you’ll be given the option to wake Alexa by saying “Alexa” with a chime. This feature is on default off mode, but you can activate this depending on your tastes.

Also, don’t forget to link the music services you enjoy in the Alexa app to be accessible to your Sonos device too. Once these steps are done, go to the Sonos app and select ‘I’ve set up my music in Alexa’.

At this point, you’ll be free to use Alexa’s smart features by only talking to the Sonos Roam or any Sonos device you have lying in each room.

How Do I Connect Google Assistant With Sonos Roam?

Similar to Amazon’s Alexa, Google Assistant can have various smart features. When you connect it to Sonos Roam, you’ll get the perks of having a virtual helper that can do basic tasks for you.

Searching the web, playing specific audio playlists, and connecting you to loved ones are some of its cool offers. You can also combine this AI to your Roam in a few simple steps:

  • Open the Sonos controller application on your iOS or Android.
  • Go to Settings, then Services and Voice. Under the Voice option, select the ‘Add a service’ label.
  • Choose Google Assistant, then tap on ‘Add to Sonos’.
  • Once you’ve merged the two programs, choose the rooms you’d like Google Assistant to access. It can either be a series of rooms or all of them, depending on your choice.
  • After deciding, you’ll find yourself in the Google Assistant application.
  • Google Assistant will prompt you to sign in to your Sonos account. Set up your Roam device in the Google Assistant application.

You’ll be asked to provide your address, pick the room your Roam is located, as well as the music services you prefer. Additionally, you’ll also choose if you want the Google Assistant chime to be active or not. When you say ‘Hey Google’ you’ll hear a jingle if you want it activated.

How Do I Adjust the Volume on My Sonos Roam?

If you think that your Roam lacks or exceeds in volume, you can easily adjust it in two ways. First is through the speakers themselves, where the – and + buttons can be quickly identified.

If you’re far from your Sonos Roam, you can also control the volume output through your source device. However, it will take a little bit of setup to do so. Here’s how you activate the hardware volume control through the Sonos controller app:

  • Open the Sonos app on your source device. Then navigate to the Settings options.
  • Search for ‘App Preferences’ among the choices and tap ‘Hardware Volume Control’.
  • Click Enable.

You’ll now be able to use the volume buttons in your iOS or Android device to adjust the Roam’s volume. However, note that this is only available when the Sonos controller app is open. There are also certain exceptions where the control is not available, and these are:

  • When you’re navigating the home screen
  • Another third-party application is streaming video or audio on the device
  • A screen reader is activated
  • Headphones are linked
  • There is another Bluetooth audio device connection

How Do I Turn Up the Bass on My Sonos Roam?

If you’re not satisfied with the default bass and balance of your Roam, then you can use the Sonos controller app to adjust it. This is why it’s important to always keep your source device with you since the controller app is more than just an accessory.

Here’s how to adjust the treble, bass, balance, and loudness of your portable wireless Roam speakers:

When Using An iOS or Android Device

  • Launch the Sonos controller application.
  • Go to the Settings tab, then tap System.
  • Choose the room you’d like to adjust the sound settings.
  • Navigate to the EQ option and drag the respective sliders according to your style.

When Using Mac or PC

  • Open your Sonos application on your chosen device.
  • When on a Macbook, go to the Sonos drop-down menu located on the top left screen. Navigate to Preferences.
  • If you’re using a PC, click the Manage drop-down menu at the top of the screen and go to Settings.
  • Click on ‘EQ Settings’ and then select the targetted room from the drop-down menu to adjust the equalization of Roam.

To help you identify what aspect of the audio you’re adjusting here’s a table about the four-volume setting on the Roam:

Setting Function
Balance Control the volume output on the left and right audio channel
Bass Controls the lower frequency audio, including bass or kick drum
Loudness Increases specific frequencies like the bass during low volumes
Treble Controls the higher frequency sounds, like guitar and vocals

How Do I Play Music on Sonos Roam?

To enjoy a whole sound experience in your Roam, you simply need to learn the ropes over the Sonos controller application. This program glues Sonos’ devices together and boasts higher resolution audio technologies.

Activate any music service accounts through the Sonos app and hear it blast in full tune using the Roam. The sky’s the limit for the music collection on the Sonos app, be it Apple Music, Soundcloud, or Spotify.

All you need to do is link your Roam in the Sonos app, browse through your music collection, and press play. Not only that, but you get to play music everywhere in the house – as long as there is a Sonos device lying around.

How Do I Play Music Through My Sonos Roam Bluetooth?

If you’re in an area where WiFi is absent, or you just like to listen to your downloaded music, a Bluetooth connection is key. Since the Roam is the ultimate wireless speaker that Sonos boasts of, it’s not surprising that it can also function well using Bluetooth.

You’ll need to activate the Bluetooth pairing mode of your Roam device before anything else, though. To do this, just press and hold the power button for three seconds or until you hear a chime. If the status light blinks blue, your device is ready to pair.

In this case, you can now see the Roam in the list of devices on your Bluetooth page. Just click on your wireless speakers and wait for the status light to turn solid blue. This indicates that you are connected to your source device and can play music anytime.

How Do I Play Music From My iPhone on Sonos Roam?

Apple indeed has a history of closing its gates from other brands, but that was all in the past. As such, you’ll find your iPhone capable of streaming music with a different speakers line. This is possible using Apple’s AirPlay feature, which acts as a Bluetooth signal.

However, the Roam is only compatible on iPhones with AirPlay 2 – quite rare for wireless speakers. You’re free to stream audio and other media through this Sonos-to-AirPlay linkage. Here’s how you can connect establish its connection:

  • Go to the Control Center of your iPhone. You can do this by swiping up or down once, depending on the model you have on hand.
  • Check for the audio card in the upper right corner and tap the AirPlay icon. This symbol has three circular shapes connected to a single triangle.
  • Tap on the Sonos Roam to establish an iPhone connection via AirPlay.
  • Once connected, you’ll be able to stream music from your source mobile device.

Why Is My Sonos Roam Not Playing?

One of the first reasons you can think of when the Sonos Roam is not playing is its battery level. You can’t blame yourself, Roam really is not the best wireless speaker if you’re prioritizing battery life. You’ll just inevitably need to plug it into a power source before using it to stream audio once more.

If the battery is not the problem and you’ve already charged it for more than a few hours, then maybe the Roam needs a little tinkering. The system may have gone haywire, which in this case, you’ll need to reboot or reset your Sonos device.

Factory Resetting The Sonos Roam

  • Before beginning the reset process, ensure that the Roam is on and not connected to a power source.
  • Press the power button for a minimum of five seconds to trigger it to turn off. The chime and the LED indicator will show that the Roam is fully off.
  • Hold the Play/Pause button and simultaneously press and release the power button of your speakers.
  • Note that you should not let go of the Play/Pause button until the light status turns orange and white.
  • Once the light blinks green, the Roam reset and is ready for linking.

Rebooting the Sonos Roam

  • Check if the Roam has been disconnected from the charging cables and wireless plugs.
  • Press and hold the power button on the back of your device for a minimum of five seconds. Once you hear the power-off tone and the light indicator dies, wait for ten seconds.
  • After ten seconds, turn the Roam back on by pressing the same power button.

On the off chance that the Roam still has not regained its functions after doing both resetting and rebooting, then have it checked. This may be due to an error in processing, so you’ll be refunded, or the item will be replaced.

How Do I Play Radio on Sonos Roam?

If you want to listen to the radio via the Roam, just remember that you have the Sonos controller app. This app is a hub for an infinite number of music services, including Sonos’ very own take on the radio.

You’ll only need a WiFi connection for the radio to work on your device. Simply locate it in the Sonos controller app, and you’ll find yourself in the middle of a hot hits streaming session.

How to Play YouTube on Sonos Roam

If you’re a premium YouTube enthusiast, you’ll find that streaming on the Roam is quite an easy feat. Just like with all other third-party programs, you’ll also need to install and log in to your YouTube account within the Sonos app itself.

Here’s a step by step process to get you started on your YouTube to Roam sound encounter:

  • Go to the Sonos app on any source device of your choice.
  • Tap More, then Add Music Services. Select the YouTube Music option and immediately click on ‘Add to Sonos’.
  • After clicking, you’ll need to encode whether you’re a YouTube Music subscriber or you’re new to the platform. If you’re new, you’ll be prompted to sign up.
  • After authorizing YouTube Music as a service, you’ll automatically go to your device’s web browser.
  • Enter the code provided, then tap ‘Next’.
  • Select the Google account you want to use with YouTube Music and give permission by clicking Allow.
  • Wait for the notification that the account you chose has been authorized.
  • Name your YouTube Music in the Sonos application upon returning.

How to Use Sonos Roam Away From Home

The Sonos Roam is a compact, portable device you can use anywhere as long as you have a source device with you. Whether you’re in the park or the cafe downtown, you’ll only need a gadget capable of hooking up with the Roam.

If you’re away from home but still want to stream using the Sonos Roam, then you can use a Bluetooth connection to make it possible. You’ll only need to activate the Roam into Bluetooth pairing mode and then watch it appear in your list of visible devices. Once connected to your source device, you’re free to stream any available media of your choice.

If you don’t have any downloaded media on your phone, but WiFi is available, you can hook up your Roam in the signal network. That is if you have the drive to repeat setting up the Roam on WiFi once more.

How Do I Clean My Sonos Roam?

Sonos recommends its users to clean their devices, including the Roam, with particular care. First, a soft, dry, lint-free cloth is non-negotiable. This is because it can be useful in removing tough stains without causing damage.

To do so, slightly damp the cloth with a mild soap solution and rub gently on the affected area. Strong liquids like isopropyl alcohol or paint thinner are a big no, as they can damage Roam’s finish.

You should also remember not to vacuum or apply air pressure to the Roam. Well, you can, but only if you want to cause damage to the microphones!

How Do I Dry Out My Sonos Roam?

Upon purchasing the Roam, you’re promised strong, durable speakers able to withstand wear and tear. This device truly delivers, as the Sonos Roam has an IP rating of IP67. If you’re not familiar, then know that this means your speakers are waterproof for up to 3ft (1m).

As such, you can confidently bring it in the shower or even by the poolside. It won’t get damaged if it’s within the device’s boundaries. However, after being soaked in water, drying out the Roam is a whole other issue.

Luckily, it’s quite easy to cater to the Roam’s aftercare when wet. You’ll only need a dry cloth or towel to remove the excess and dripping water from the device. Once done, leave the speakers to air-dry to evaporate extra water even in the nooks and crannies.

Note that using a hairdryer or blower is not ideal when drying the Sonos Roam. It’s best to stick with the instructions to avoid damage to your trusty, waterproof speakers.